CW-10/CW-30/CW-40/CW-50/CW-70

Производитель:

Больше изображений

  • CW-10/CW-30/CW-40/CW-50/CW-70 1
  • CW-10/CW-30/CW-40/CW-50/CW-70 2
CW-10/CW-30/CW-40/CW-50/CW-70
Под заказ (ждать 2-3 недели)
Описание

FEATURE:

  • MULTI FUNCTIONS:
    1.By inputting the wire diameter , workpiece material & thickness , and desired surface finish , optimum
    cutting conditions are automatically generated from memory.
    2.It is possible to carryout the machining conditions of second, third, fourth cutting; the second cutting easily obtained by using the retrace function.
     
  • WIRE BREAKAGE RECOVERY:
    1.In case of wire breakage during machining, just press button and wire returns to start point.By ressing button , wire will move rapidly retracing machining path back to that point. 
     
  • WATER COOLING CONTROL:
    1.The inverter control for pump and water coolant unit keep the thermal balance on every part of the machine and lowexpansion of material in submerged machining.
     
  • WIRE FEEDING:
    1.Operator has only to pass wire through lower nozzle guide and wire will be taken by the water-jet wire-collecting device to the collector. 
    2. Equipped power mos-transistor circuit system. max. out-put current 25 ampere .

  • REMOTE CONTROL BOX:
    1.For the convenience of operator , the remote control box contains many of the functions required for set-up.
    2.PC-base designed, CNC Controller with IPC, used G.M. NC-code edit. standard with CF CARD and RS-232c interface

 

MACHINE UNIT SPECIFICATION :(Specifications subject to change without notice)

ITEM CW-10 CW-30 CW-40 CW-50 CW-70

Machining method

Submerged or Flushing

Max.workpiece size
(WxDxH)
(mm)

680x420x150

780x500x250

880x500x250

1,000x690x300

1,200x790x300

Max. workpiece 
weight

250kg

500kg

550kg

800kg

1,000kg

X,Y axes travel

300x200(mm)

400x300(mm)

500x300(mm)

600x400(mm)

800x500(mm)

Z axis travel

150(mm)

250(mm)

250(mm)

300(mm)

300(mm)

U,V axes travel

30x30(mm)

50x50(mm)

50x50(mm)

60x60(mm)

60x60(mm)

X-Y axis feed rate

Max. 900mm/min

Drive motor
(X, Y, U, V)

AC Servo Motor

Wire diameter
(standard)

ø0.25mm(ø0.15 - 0.3)

Wire tension

200-2500gf

Wire feeding speed

0-15m/min

Best surface 
roughness

Ra0.65m

Max. taper angle

15°/80

Max.wire
bobbin weight

6kg

6kg 6kg 10kg 10kg

Work tank 
inner dimensios
(WxDxH)(mm)

(S)850x573x375
(F)920x573x400

(S)970x719x510
(F)1040x719x450

(S)1070x719x480
(F)1140x719x450

(S)1136x900x530
(F)1272x862x480

1492x972x480

Machine weight

1500kg

2200kg

2400kg

2800kg

4100kg

 

DIELECTRIC FLUID SUPPLY UNIT (FILTERING UNIT):

ITEM CW-10 CW-30 CW-40 CW-50 CW-70

Filter tank capacity(liter)

480/420

690/420

830/420

1215/420

420

Filter element

Paper filters

lon exchange resin

15

Conductivity control

Standard

Fluid temperature control

Auto

Outside dimension (WxHxD)(mm)

(S)1100x1400x1290
(F)950x1400x1290

(S)1100x1570x1290
(F)950x1400x1290

(S)1150x1820x1360
(F)950x1400x1290

(S)1200x1800x1470
(F)950x1400x1290

950x1400x1290

Net weight

200kg

250kg

260kg

280kg

280kg

 

POWER SUPPLY UNIT  

Circuit system

Power MOS transistor

Max. output current

25A

Voltage select

145Volt.

IP select

10 steps

Off time select

50 steps

 

CNC CONTROL UNIT  

I/O device

Keyboard, RS-232C, CF CARD

Display type

15" LCD-TFT

Control system

IPC, close loop software servo system

Control axis

X, Y, Z, U, V, (5 axes)

Setting unit

0.001mm

Max. command value

9999.999mm

Interpolation

Linear/Circular

Command system

Abs./lnc.

Machining feed control

Servo/Const. Feed

scaling

0.001-999.999

Auto 2nd cut system

Re-trace and auto changed machining data

Machining condition memory

0-255

Outside dimensions(WxDxH)

600x870x1850mm

Total AC power input

3ø220V 10% / 13 KVA

 

Технические характеристики
Отзывы

Отзывы CW-10/CW-30/CW-40/CW-50/CW-70

Оставить отзыв
x
Оставить отзыв

Рейтинг:


Отзывов пока нет. Показать все отзывы